Machinery
Mobile – Chamfers up to 3 mm, hand-operated
aso310 20039 | ASO 310 - PneumaticHandheld Chamfering Machine: ASO 310 - Pneumatic
• Chamfering of large, flat work pieces out of steel, stainless steel (INOX),casting, aluminium, brass and copper • Chamfering of straight edges and internal and external contours • Absolutely burr-free cutting of straight edges and contours • Clean and constant processing of parts and series • Small cutter head with cutting insert also for bores above 12 mm • Fast retrofitting or replacing of hard metal-cutting inserts • Easy operation and handling
aso314 34657 | ASO 314 - ElectricHandheld Chamfering Machine: ASO 314 - Electric
• Chamfering of large, flat work pieces out of steel, stainless steel (INOX), casting, aluminium, brass and copper • Chamfering of straight edges and internal and external contours • Absolutely burr-free cutting of straight edges and contours • Clean and constant processing of parts and series • Small cutter head with cutting insert also for bores above 12 mm • Fast retrofitting or replacing of hard metal-cutting inserts • Easy operation and handling
aso312 26153 | ASO 312Handheld Chamfering Machine: ASO 312 - Pneumatic
• Chamfering of large, flat work pieces out of steel, stainless steel (INOX), casting, aluminium, brass and copper • chamfering of straight edges or rounding. • Fatigue-proof operating by small weight machines • The chamfer angle is variable between 15° and 45° • The insert cutter can be loaded with a chamfer inser or radius insert • the v-prism is rotable according to right- or lefthander • Easy operation and handling
aso313 32938 | ASO 313Handheld Chamfering Machine: ASO 313 - Electric
• Chamfering of large, flat work pieces out of steel, stainless steel (INOX), casting, aluminium, brass and copper • chamfering of straight edges or rounding. • Fatigue-proof operating by small weight machines • The chamfer angle is variable between 15° and 45° • The insert cutter can be loaded with a chamfer inser or radius insert • The v-prism is rotable according to right- or lefthander • Easy operation and handling
53062 SMA 20 P pneutmatic druckluft | SMA 20-PHandheld Chamfering Machine: SMA 20-P - Pneumatic
• Chamfering of large, flat work pieces out of steel, stainless steel (INOX),casting, aluminium, brass and copper • Chamfering of straight edges and internal and external contours • Absolutely burr-free cutting of straight edges and contours • Clean and constant processing of parts and series • Fast retrofitting or replacing of hard metal-cutting inserts • Easy operation and handling
19535, 45856, 31676, 26507 Schleifer Druckluftschleifer | Mobile – Chamfer up to 20 mm, hand-operated
aso750 aso750/2 10304 10341 10670 10249 18646 | ASO 750 – 760Handheld - Chamfering and Deburring Machine: ASO 750 – 760
• Powerful machine for external chamfering of large plates, especially for weldseam preparation • Suitable for sturdy continuous operation • Easy chamfer and angle adjustment • Easy operation and handling • Sturdy casting construction
HKFW 125; HKFW125; 56838 | HKFW125Handheld chamfering machine: HKFW 125 for contours and straight edges
• Chamfering of flat work pieces out of steel, stainless steel (INOX), casting, aluminium, brass and copper • Chamfering of straight edges and contours • Preparation of weldseam • Chamfering of flat work pieces out of steel, stainless steel (INOX), casting, aluminium, brass and copper • Chamfering of straight edges and contours • Preparation of weldseam
51325 SMA 50 E SMA50E GERIMA | SMA 50-EHandheld chamfering machine: SMA 50-E for contours and straight edges
• Chamfering of flat work pieces out of steel, stainless steel (INOX), casting, aluminium, brass and copper • Chamfering of straight edges and contours • Preparation of weldseam • Chamfering of flat work pieces out of steel, stainless steel (INOX), casting, aluminium, brass and copper • Chamfering of straight edges and contours • Preparation of weldseam
51506, SMA40P, SMA, 40, P, Gerima | SMA 40-PHandheld chamfering machine: SMA 40-P Pneumatic for contours and straight edges
• Chamfering of flat work pieces out of steel, stainless steel (INOX), casting, aluminium, brass and copper • Chamfering of straight edges and contours • Preparation of weldseam • Chamfering of flat work pieces out of steel, stainless steel (INOX), casting, aluminium, brass and copper • Chamfering of straight edges and contours • Preparation of weldseam
Mobile – Chamfers up to 20 mm, with automatic feed
ASO 900 | ASO 900Selfpropelling Chamfering Machine: ASO 900
• Universal for all materials, suitable for the continuous operation, also for stainless • Chamfering of weld-chamfers at angle from 15° - 60° especially for long and widespread work pieces • Swarf box as sheet construction • Special version for landing milling • Automatic feed and speed adjustment • Chamfer angle adjustment from 15° - 60° regarding the perpendicular • Cutter adjustment from the second cut in 5mm-steps to max. 28 mm • Mobile operation of roller carriage or with crane support
54235 ASO910 910 | ASO 910Selfpropelling Chamfering Machine: ASO 910
• Mill sales at an angle of 75° - 90° especially for long and extensive work pieces • This machine is universal for all materials and suitable for the continuous operation • Swarf-collecting container as construction sheet • Special version for surface cutting and cutting tulip • Automatic feed and speed regulation • Fas angle adjustment (regarding the vertical) • Cutting adjustment from the second cut in 5 mm steps to max. 28 mm • Mobile operation of roller carriage or with crane support.
Stationary – Chamfers up to 3 mm
aso850k 30363 43143 konturen | ASO 850-KDeburring and Chamfering Machine for Contours: ASO 850-K
• Precise deburring and chamfering of internal and external contours at flat work pieces up to 5 mm • Universal for all materials and suitable for the continuous operation • Sturdy casting construction with big tabletop • Stepless speed adjustment • Mobile undercarriage
aso400 fs5 10199 41408 | FS 5Deburring and Chamfering Machine: FS 5
• Deburring and chamfering of small and big work pieces more than 2 mm height • Clean and burr-free chamfering up to 2 mm x 45° in 1 cut, or also up to 10 mm chamfer with • Universal for all materials and suitable for interrupted operation • For easy deburr and chamfer works • Fast change of side milling cutters and inserts
ksm125 ksm125sl 15990 45172 | KSM 125Deburring and Edge Grinding Machine: KSM 125
• Precise deburring and chamfering of straight contours at soft and hard work pieces • Universal for all materials, suitable for continuous operation • Sturdy steel construction with exhauster and grinding disk adjusting button • V-Prism with micrometer chamfer adjustment • Sturdy conical 2-zone grinding disk for strong material removal (work tool feed follows along the grinding axis) • Secondary burr-free grinding by downstream deburr knife • Easy and simple handling
af165 1981 | AF 165Deburring and Edge Grinding Machine: AF 165
• Fast, cost efficient edge grinding and deburring of flat work pieces from 2 mm strength • Perfect for removing of saw burr • For soft and hardened material • Sturdy sheet construction with exhauster • Safety and permanent deburring due to the guide block with adjustable grinding gap • Easy control and fast work tool change
speedy prisma150 speedy prisma 210sl 39600 46069 | Speedy PrismaDeburring and Chamfering Machine with V-prism: Speedy Prisma
• Burr-free chamfering of small precision parts from 1 mm height in almost polished precision • Surface protecting precision chamfers up to 2 mm (no scratches in the work piece!) • Universal for all materials and suitable for the continuous operation • Compact small table machine • Perfect for small work pieces • Easy control and fast tool change • Speed preadjusted on 20 800 rpm for steel (27 000 U/min for alu feasible)
aso600a 10609 kantenfräsmaschine | ASO 600-AUniversal - Contour Chamfering Machine for edges: ASO 600-A
• Deburring and contour chamfering of work pieces out of steel, stainless steel, casting, non-metal pieces (aluminium, copper and brass), plastics, acrylic glass, soft plastic, rubber, wood or particle board • Processing internal and external of flat, round or angular shaped work pieces of different sizes also of sheet segments • Chamfering and deburring with full hard metal-form cutters with ball bearing or with guide finger and guide ruler • Exact chamfer adjustment • The right material guarantees a high tool lifetime • Chatterfree chamfering both in series and for single pieces • Flexible operation by compact construction • Tool change and adjustment within a few seconds
speedy kontur270 speedy kontur 320 1011 961 | Stationary Deburring and Chamfering Machine for contours: Speedy ContourStationary Deburring and Chamfering Machine for contours: Speedy Contour
• For precise deburring and chamfering of internal and external edges of flat work pieces up to 2 mm • Perfect for alu and plastic process (~27 000 U/min) • Universal for all materials and suitable for continuous operation • Compact, handysome table machine (next to the CNC-Maschine!) • Easy control and fast tool change • Spindle speed: 20 800 rpm preset (optional 27 000 rpm for alu)
aso400 fs5 10199 41408 | ASO 400Deburring and Chamfering Machine: ASO 400
• Deburring and chamfering of small and big work pieces more than 2 mm height • Clean and burr-free chamfering up to 2 mm x 45° in 1 cut, or also up to 10 mm chamfer with • Universal for all materials and suitable for interrupted operation • rounding straight edges by radius inserts R1 until R3 • Speed adjustment (recommended for alu- or VA-process) • For easy deburr and chamfer works • Fast change of side milling cutters and inserts
KKE, KKE1, KKE2, 22129, 32024, MFK600, MFK,600 | KKE1 / KKE2Contour and Chamfering Machines for edges : KKE1 / KKE2
• For a precision deburring and chamfering of the inside and outside edges of work pieces up to 2 mm. • Processing of flat, round or square work pieces of different sizes also of sheet segments. • Chamfering and deburring with full hard metall-form cutters with ball bearing or with guide finger and guide ruler. • Universal for all materials, suitable for the continous operation. V-prism attachment for the processing of straight edges. •Guide finger, radius- and chamfer cutter with guide ball bearing • Chip/dust vacuum cleaner • Exact chamfer adjustment • The right material guarantees a high tool lifetime • Chatterfree chamfering • Flexible operation by compact construction • Tool change and adjustment within a few seconds • Handy compact table unit (beside the CNC-machine)
Stationary – Chamfers up to 20 mm
aso650 10229 10243 46812 v prisma | ASO 650Deburring and Chamfering Machine for straight edges with V-prism: ASO 650
• Deburring and chamfering of small and big work pieces from 2 mm height • Clean and burr-free chamfers up to 3 mm x 45° in 1 cut, otherwise also up to 10 mm chamfer width with special cutter head also up to 15 mm chamfer width • Universal usable for all materials • Sturdy casting construction with swarf box • Big guidances, hardened and polished • Chamfer adjustment by micrometer button • Axial cutter head adjustment for utilisation of inserts by small chamfers • Fast change of disk cutter and inserts
aso160 v prisma 22277 | ASO 160Deburring and Chamfering Machine for straight edges with V-prism: ASO 160
• Deburring and chamfering of small and big work pieces from 1 mm to 5 mm height • Clean, burr-free and optical nice chamfers up to 5 mm x 45° in 1 cut, otherwise also up to 8 mm • Universal for all materials and suitable for continuous operation • Sturdy sheet construction with swarf drawer or swarf ejection tube for automatic feed • Guidance hardened and polished • Chamfer adjustment by micrometer • Fast change of inserts and cutter
wkf170 vorschub wkf170 53492 53493 | WKF 170Angle adjustable Chamfering Machine for the preparation of weldseam: WKF 170
• Suitable for all materials, steel, tool steel, non-ferrous metal and plastics • Preparation of weldseam • Chamfering of round stock cuts, tubes and blanks with table stop collar • Bevel 0,1 up to 8 mm chamfer height in steel from 3 mm work piece height • Use of customary inserts • No training time, because guidance is given • Fast cutter and insert change
chp6 kbm18 quicker maxiquicker 35333 37422 28582 37935 automatis | CHP-6; KBM18, Quicker, Maxi QuickerAutomatic Weld-Chamfering-Machines: CHP-6, KBM18, Quicker, Maxi Quicker
• Fast and quiet chamfering of work pieces with chamfer width up to 18 mm in 1 cut • Smaller sheet plates from 300 mm length, 40 mm with and 4 – 40 mm height are passed by cutting wheel automatically • Widespread, sheet formates have to be put on working height, so that the weld-chamfering-machine with mobile undercarriage can be inserted or hanged to and mills independently along the edge • Easy chamfer and and sheet adjustment • Easy angle adjustment • Sturdy construction
55111 KKF3 KKF 3 Kantenfräsmaschine Entgratmaschine entgraten fr | KKF3Universal - Contour Chamfering Machine for edges: KKF 3
• Deburring and chamfering of small and big work pieces from 1 mm • Processing internal and external of flat, round or angular shaped work pieces of different sizes also of sheet segments • Clean, burr-free and optical nice chamfers up to 5 mm x 45° in 1 cut • Universal for all materials and suitable for continuous operations • Mobile undercarriage • Exhaust • Sturdy sheet construction • Table top hardened and polished • Exact chamfer adjustment by micrometer • *NEW* Universal stable Ø 30mm ball bearing guide for chamfers up to 4x45° and radius chamfers from r1 to r5 • soft tapping milling cutter • The right material guarantees a high tool lifetime • Fast change of inserts and cutter • Chatterfree chamfering both in series and for single pieces
Stationary – Sheet Deburring
bke550 45373 | Sheet Deburring Machine: BKE 550Sheet Deburring Machine: BKE 550
• Fast deburring on both sides in one operation • Universal for all materials from 1 – 5 mm height • For small sheets in horizontal operation • For large sheets in vertical operation • Sturdy sustainable sheet construction with exhauster • 2 speed steps and ntool adjustment knob (+ / -) • Stop collar fence for the sheet height adjustment • Easy handling and fast tool change
57511 OFB 500 oberflächen surface finishing bearbeitung | OFB-500Surface finishing machine: OFB-500
• Universal for all materials up to 1-100 mm material strengh • Deburring from inside and outside contours • Surface finishing • Polishing Roller ø 130 x 30 x 400 mm • Striped sanding wheel • Further grinding materials on request • Stepless speed controller • Stepless feed 0-3 m/min • Vacuum connection ø 100 mm • Simple operation and fast equipment change • Max. operation width 400 mm
.jpg)
Drill Grinding Machines
s350 s3 50 31739 | S-3-50Spiral Drill Grinding Machine: S-3-50
• Grinding and center point grinding of HSS-spiral drills • By the patented drillgrinding a pointing out is not needed. • Easy handling, also for unskilled employee suitable • Patented, three dimensional drill out with center pointed cross cut
edg213n edg1226n 42769 10212 | EDG 213N / 1226NDrill grinder: EDG 213N / 1226N
• Grinding and center point grinding of HSS- and HM-spiral drills • Easy handling, also suitable for unskilled employee • Regrinding and center point grinding in the same drill holder
Universal Tool Grinding Machine
asm125s asm125 s 10001 | ASM 125 SUniversal Tool Grinding and Lapping Machine: ASM 125 S
• Regrinding of turning-steels and high speed steels or inserts • Smooth-running grinding spindle-precise-height-adjustment • Ball bearing mounted table guidance with micrometer screw
Magnet Technology
EPM - Electro-Permanent-Magnet-Systems
doublemag double mag 49781 52186 51991 50542 52185 21991 57086 | DOUBLE MAGBoth-sided Electropermanent-Magnetic-Clamping-Elements: DOUBLE-MAG
• DOUBLE MAG magnetic clamping elements can offer a low-priced alternative to the bigger EPM chuck systems. These patented magnetic clamping elements can be used in a single version or in the composite of severals. They are good supplement to replace single chucks by machining large workpieces. • No distortion by clamping the workpieces thorugh the magnetic force, accurate machining. • Low vibration while milling, therefore a better tool life and protection of the milling spindle. • Through machining: Elements can be placed whre they are needed avoiding points where they would interfere with the machine path. • A 5-sided machining in one clamp, horizontal and vertical. • Ideal suitable for milling, drilling, sawing, and welding machining, because a roundabout and through machining is possible. • Lower setup costs • A full steel corpus for best protection against hot chips and coolant • Both sided clamping: workpieces and machinetable • Rough and uneven workpieces can safely be clamped by mobile pole extensions. • Adhesion: 3500 N with pole 50x50 mm • The penetration depth of the magnetic field amounts max. 10 mm • The DOUBLE MAG element: either as square or bar magnet elements There are two technical possibilities: a) Standard, with both-sided clamping area with two connectors, as single module or connected in a row. b) Optional with additional positioning magnets on the bottom side
magnetspannplatte 47058 47057 48641 49319 | ASSQUADThe EPM-Square Pole chuck with a full steel surface: ASSQUAD
• Perfect for clamping of small and big work pieces for milling • Clamping without warpage, also of uneven pieces • Complete a full steel body, so the best protection against hot chips and coolant • The operating voltage is 400 V • 4-channel control devices for simultaneous connection of up to four magnetic chucks are available as an option • Fixed and mobile pole extensions for relining uneven work pieces are available as accessories
vollstahlmagnetspannplatte kombiplatte 48900 49011 50235 49833 | MAGNASLOTFull steel EPM square pole Chucks for heavy metal cutting: MAGNASLOT
• Perfect for clamping of magnetic and nonmagnetic work pieces by means of t-slots within the magnet chuck,the perfect combination of a slot plate and magnetic chuck. • Adhesion: 8450 N per pole with pole surface 75x75 mm • Penetration depth 20 mm • Full steel version with or without t-slots • The operating voltage is 400 V
| EPM Radial Pole ChuckEPM Radial Pole Chuck
• Perfect for clamping and processing of rings and round slides. • Adhesion about 140 N/cm² • Electro-permanent-magnet system, so no permanent connection to the controller needed • 400 V voltage pulse power • Protection class IP 67 • Established T-slots for attaching pole extensions or mechanical clamping tools Available from D=>500 mm, prices, dimensions and delivery time on request
PFR 50/32 PMQ 50/32 RMP 57 38010 38011 52553 steuergerät 13070 | Pole Extensions and ControllerPole Extensions and controller
• All pole extensions transfer the magnetic force from the magnetic chuck to the work piece. The mobile pole extensions adapt automatically to the work piece locating surface without warping the work piece.
Permanent - Magnetic chuck, rectangular
microfine magnetspannplatte | Permanent-Magnetic Chucks: MicrofinePermanent-Magnetic Chucks: Microfine
• For clamping when eroding and grinding works • For small and thin work pieces • Extreme high adhesions flat magnetic field • For small and thin work pieces • Middle clamping force (ca. 80 N/cm²) • Fine pole pitch 2,0 mm (1,5/0,5 mm) • Low headroom • Mechanical power cycled • Liquid-tight
pf1710 pf4020 5080 5010 | PMNEOPermanent- Magnet Chucks: PMNEO
• Super-strong clamping plate for milling • Pieces about 30 x 15 x 6 mm can be streched with max. achievable adhesion forces • Double Neodymium magnet system • 11+ 4 mm transverse pole pitch • Magnetic field height about 10 mm • Usable top plate 6 mm • Adhesion about 150 N/cm2
mf3015 mf4020 mf5020 41733 22221 39408 | Microfine - magnet sinetableMicrofine - magnet sinetable
• For clamping when eroding and grinding works • For small and thin work pieces • Extreme high adhesions flat magnetic field • For small and thin work pieces • Middle clamping force (ca. 80 N/cm²) • Fine pole pitch 2,0 mm (1,5/0,5 mm) • Low headroom • Mechanical power cycled • Liquid-tight • Parallelism: 0,002/100 mm
Permanent - Magnetic Chuck, round
RS 13 15 20 25 30 35 40 50 60 57399 31253 57400 57401 57402 5740 | RSPermanent- Magnetic Circular Feed: RS
• For safe clamping of rings, discs and hard turning • Neodym- Magnetic system • Radial pole • Holding power about 140 N/cm • Magnetic field height about 10 mm • Usable top plate RS 13 = 3 mm, RS 15-60 = 7 mm • Center, a through hole can be introduced with the diameter C. • The diameter B is not magnetically active
rfp30 49005 | RMPermanent- Round Magnetic Chuck: RM
• Super-strong round chuck for turning, also for gross shares. • Ceramic magnetic system, aluminium base body • Pole pitch 5+8 mm • Holding power about 140 N/cm • Magnetic field height about 8 mm • Usable top plate 8 mm
Permanent-Lifting-Magnets
elm100 elm300 elm600 elm1000 elm2000 41616 41617 41618 41619 279 | ELMPermanent- Lifting Magnets: ELM
• For engineering, steel working industries, tool constructions, steel and plant construction, shipbuilding and material store. • Perfect for lifting and transporting of flat and round material, also with sensitive surface • Perfect reliability, because the pull-off force amounts 3 times of the recommended lifting force • Easy switchable • Easy handling, due to low weight • Small sized and sturdy • Max. application temperature 80° C • Our service: UVV-safety-examination and repair!
ultraliftplus | Ultralift PlusPermanent-Lifting Magnets Ultralift Plus
•For engineering, steel working industries, tool constructions, steel and plant construction, shipbuilding and material store. • Patented safety system, which prevents the switching with load (only UL Plus) •Perfect for lifting and transporting of flat and round work pieces, also with sensitive surface • Absolute reliable, because the magnet is not switchable under load (patental safety mechanism) • Easily switchable • Easy handling, because of the small weight • Small sized and sturdy • Max. application temperature 80° C • Our service: UVV-safety-examintaion and repair • Switchable with one hand
ultralift tp150 tp300 47562 47563 | Ultralift TP Lifting Magnets for thin sheetsUltralift TP Lifting Magnets for thin sheets
This magnet was especially developed for the transport of thinner or thin-gauge materials. Its flat magnetic field permits to pick up each sheet from 5mm strength separately of the pile. • Especially suitable for thin material.
tecnomagnete | MaxXPermanent- Lifting Magnets: MaxX
•For engineering, steel working industries, tool constructions, steel and plant construction, shipbuilding and material store. • Perfect for lifting and transporting of flat and round material, also with sensitive surface • Perfect reliability, because the pull-off force amounts 3 times of the recommended lifting force • Easy switchable • Easy handling, due to low weight • Small sized and sturdy • Max. application temperature 80° C • Our service: UVV-safety-examination and repair!
ski 43161 42037 | SK-IPermanent- Lifting Magnets: SK-I
• For engineering, steel working industries, tool constructions, steel and plant construction, shipbuilding and material store. • Special version for hot workpieces till 500°C • Perfect for lifting and transporting of flat and round material, also with sensitive surface • Perfect reliability, because the pull-off force amounts 3 times of the recommended lifting force • Easy switchable • Easy handling, due to low weight • Small sized and sturdy • Max. application temperature 80° C • Our service: UVV-safety-examination and repair! • Additional eyelet for vertical transportation at extra cost available ( SK-I 300/ SK-I 600 Art.-Nr.: 47392)
Electro- /Electropermanent- and Battery - Lifting Magnets
| Electropermanent-Magnet-Spreader BeamsElectropermanent-Magnet-Spreader Beams
• EPM-magnet-traverses are used for the safety transport of big sheets. • EP-magnet-spreader beams don‘t use a permanent current supply • Only a current signal of the controller is necessary for switching • It is possible to pick sheets from 4 mm up separately of the pile • EP-magnet-spreader beams are constructed modularly out of crane traverse, EP-magnet modules and electronic 2-circle control
| Electropermanent-Magnet ModulesElectropermanent- Magnet Modules
• EPM-modules can be used simple or linked in complex traverse or in automation systems for the safety sheet transport. • EPM -modules don‘t use a permanent current supply • Simply a current signal of the controller is necessary for switching • It is possible to pick sheets from 4 mm up separately of the pile • Individual combination, suitable for all claims
epm150 epm300 epm500 28199 28527 33855 39456 epmm1000 epm-b75 ep | EPMElectropermanent- Battery Magnets: EPM M) Electropermanent- Lifting Magnet: EPM-M 1000, and Electro-Battery Magnets (BM)
• They unify the safety of permanent magnets and the comfortability of electromagnets. • The are not switched by persistent electric flux but by an electric impulse, lasting for some seconds. They are extremely safe because, the load can‘t fell down when the currence brakes. • The switching has to be dine either by pressing the button or automode or remote control • The electropermanent lifters get their energy either from the mains or from the battery; they are mains dependant or independent by battery. • The accumulator-batteries of the epm battery lifters last much longer than the electro battery lifters, normally app. 400 ON/OFF switch cycles before recharging • EPM lifters can already lift seperately 4 mm thick sheets from a heap, an EPM battery lifter can seperate sheets from 6 mm thickness • Optic and acoustic warnings guarantee a safe work load
| Crane-Electro Sort Magnet LR 250 NCrane- Electro Sort Magnet: LR 250 N
• For the intake of small, mass or heavy massive work pieces.
Separators and Filter Magnets
micromag magnetfilter | MicromagPermanent Magnet Filter for Fluids: Micromag
Your advantages are enormous quality improvements by: • Better results when drilling, grinding or eroding • Longer life of coolance fluid • Longer life of work tools • Less maintenance / breakdown times Appilcation variables: up to max. 80° C fluid temperature with a pressure of 0 – 8 Bar • Grinding, honing and lapping machines • CNC-Maschines • High precision machines • Eroding / electric discharge machines • Laser-cutting • Injection mold machines • Cleaning • Cleaning of lubricant fluid • Motors • Drilling heads • Tool regrinding • Protection of pumps • Prefiltration • Quenching • Heating systems • Enormous efficiency in filtering – particles 0,5 µm are filtered by a permanent magnetic core • Easy and fast cleaning • Enormous cost reduction because no filter media is necessary and only the impurities are disposed
magnetstab stab gitter stäbe magnetgitter | Permanent Magnet-Sticks and -Bars Operation:Permanent Magnet-Sticks and -Bars
• For cleaning of fluids. • Extremly high adhesions with neodym-iron-boron-magnets • Low headroom • Very cheap permanent-filter magnet for occasional iron impurities
handsortiermagnet sortiermagnet hsm 148 | Hand-Separator Magnet HSMHand-Separator Magnet HSM
• For the slot of sundries
Small Magnets
Stab-greifer Stab-greifmagnete greifmagnete stabgreifermagnete | Cylindric MagnetsCylindric Magnets
Knopfmagnet Topfmagnet Knopf Topf | Permanent-Nose Magnets and Pot MagnetsPermanent-Pot Magnets Max. temp. 450°C, AlNiCo magnets, red painted
U Magnet Hufeisen | U-MagnetU-Magnet
sondermagnete haken organsationsmagnete magnet | Special MagnetsSpecial Magnets
Flach greifer greifermagnet flachmagnet gewinde gewindebuchse | Cylindric MagnetsFlat Magnet with Tap Sleeve
Permanent-Magnetic Welding Angles
| Magnetic Welding AngleMagnetic Welding Angle
• Your third indispensable hand for welding or assembly works. • Easy positioning, adjusting and fixing • Sturdy and maintenance-free • No abating of magnet power • No disruption of the arc when welding • Max. operation temperature 80° C
Permanent-Magnetic Chuck-Blocks and -Prisms
spannblock magnetspannblöcke | Permanentmagnetic blocks and prismsPermanentmagnetic blocks and prisms
• For Clamping of form work pieces • Incorporations are possible at blocs • Form blocks are not mechanical switchable • Prisms, eroding and cutting blocks are mechanical switchable
Electro Adhesion Magnets and Demagnetizer
elektrohaftmagnet | Electro Magnets (for the automation)Electro Magnets (for the automation)
• For keeping ferromagnetic work pieces • For lifting an transporting • In fully and half automated handling and conveying plants • With low-voltage 24 DC • Adhesion force depends on the strength of the material and surface quality (air gap)
entmagnetisiergeräte EDH EDS ED | Demagnetizer, also for the automationDemagnetizer, also for the automation
• Demagnetizing of ferromagnetic pieces •High demagnetizing effect •Sturdy construction, easy handling •Connectable to every 230 V-socket •EDH 123 soft demagnetizer with handle •Rest devices are stationary table-top devices
Permanent - magnetic transporters
| Hand-Magnet TransporterHand-Magnet Transporter
• For safe lifting and transporting of steel sheets, flame cut pieces, sharpe edged and greasy work pieces. • Highest safety by permanent magnets • Cold and heat resistant up to 80° C • Easily striping by mechanical release mechanism or lever control
sh35k sh60 el100 105 106 27977 | Crane-Magnet TransporterCrane-Magnet Transporter
• For safe vertical and horizontal transport of work pieces from 3 mm thickness • For safety lifting and transporting of steel sheets, thermal cut pieces, sharpe edged and greasy work pieces • Also for large formats in sheet metal stockyard • Highest safety by permanent magnets • Cold and heat resistant up to 80° C • Easily striping by mechanical release mechanism
Vacuum Technology
Vacuum Chuck Technology
| Universal - Vacuum Clamping PlatesUniversal - Vacuum Clamping Plates
A low-pressure is retared between the clamping plate and the work piece by vacuum clamping --> the work piece is pushed on the chuck plate. For vacuum clamping you need ca 10 N/cm2 adhesion force, the switching strength amounts ca. 1/3rd. • Safety clamping of different materials - a flat, permanent clamping surface assumed • Clamping of the thinnest plates from 2 mm strength • No deforming of the work piece, because the whole work piece is clamped comprehensively, permanently and gently • Can be used in different working processes, e.g. cutting, grinding, die sinking • Body out of aluminium hard-anodised, base out of steel • All around T-slots DIN 650, 10 mm • Safety clamping by flexible stop collar system • Process from 2 mm material strength • Equal for cutting- and grinding-machines suitable • Additional exhaust bores can be put work piece compatible (Allows the clamping of several pieces at the same time)
doublevac zweiseitige vakuumspannmodule | Double-VacBoth-sided Vacuum-Clamping Elements: Double-Vac
• For clamping, positioning, fixing of plates, frames and constructions on CNC-process machines or work benches • Fast and free positioning on flat surfaces without screwing - top and rear side can be clamped separately • Air consumption ca. 120 l/min with 4-6 Bar, with the automated modulating valve the air consumption can be reduced up to 80 % • Perfect efficiency with 3-4 Bar • The Double-Vac are connected separately or multiply, as clamping table usable
Vacuum Lifting Technology
kranvakuumsauger vh200 vh300 vh400 vh600 | Vacuum Exhauster for Crane TransportVacuum Exhauster for Crane Transport
• Suitable for all materials (palstic, alu, Inox, ...) with flat, gas-proof surface • Also suitable for the operation of rough surfaces and raw material • No power requirement, because handling via air pressure and/or with hand pump • Also applicable in the open with easiest handling • Gentle transport of work pieces, no deforming or scratching • Not bound to a minimum material thickness • Low dead weight, low place requirement • Vacuum control via manometer • Heightened safety by acoustic warning device when decrease in pressure • Double seal of the adhesion surfaces • Air consumption ca. 120 l/min with 4-6 Bar, with the automated modulating valve the air consumption can be reduced up to 80 % • Perfect efficiency with 3-4 Bar
saugheber saugheber mit handpumpe alu saugheber winkelsauger | Vacuum-Lifting PadVacuum-Lifting Pad
• For lifting and transporting of thin sheet, VA-material, alu, plastic and glas • Safety factor 2 when gas-proof work piece surface • Surface gentle • Fast and safety, manual clamping and loosening
Metal Cutting
Cutting
asscut hpcfräser hpc fräser | 
hsc hartfräsen hartfräser hart fräser hscfräser | 
alu kunststoff Fräser alufräser asscut | 
Minicut alu alufräser hochleistungsfräser | 
Fräser ASO600 Speedy Werkzeug Führungsfinger | Equipment
Machine Undercarriages
t500A werstattwagen wagen | Drivable Tool and Gear Waggon T500-ADrivable Tool and Gear Waggon T500-A
• 4-sided unroll frame • 4-castors, therefrom 2 with arrestors, Ø 125 mm • Self-closing 100 % • Capacity per drawer: 50 kg • Aluminium handles with lettering stripes • Central locking with Einzelauszugssperre • Double safety of the drawers by single locking • Without ripple rubber
unterwagen maxmobil werkstattwagen | Drivable Tool and Gear Waggon MaxmobilDrivable Tool and Gear Waggon Maxmobil
• Max. room planning • Max. mobility - carriage with 2 bents- and 2 castors with arrestors, Ø 100 mm • Max. bench - bearing area out of plastic with moulded-in small piece areas, high consistency against chemicals • Max. safety - self-closing 100 % and load 35 kg, Central locking and double safety of the drawers by Einzelverriegelung • Max. accessory-selection (slewable laptop-lamp, boss and manifold hook assortment) • Max. ergonomics
unterwagen | Mobile carriage "Chipcar"Mobile carriage "chipcar"
Can be combinated with the following chamfering machines ASO160 WKF170 KKF3 • 1x workplate, 1x undershelf • 4-castors, therefrom 2 with arrestors, Ø 125 mm • with chip box
unterwagen, assfalg | Mobile carriage type 2Mobile carriage type Assfalg
• 1x workplate, 1x undershelf • 4-castors, therefrom 2 with arrestors, Ø 125 mm • with chip box • with ripple rubber • with or without cut out available • ideal for use with exhaust
Measuring Instruments
Mess, Messen, Messmittel, Messschieber, Lehr, Lehre, Maß, | Assfalg Measuring Instruments Special Offer 2010 - 2011